1.Confirm the installation location of the bathroom cabinet: before laying floor tiles and wall tiles, it is necessary to confirm the installation location of the bathroom cabinet, because the installation of the bathroom cabinet is to punch holes in the wall, but also need water inlet holes and drainage holes, once installed generally can’t move the position, so confirm the installation position of the bathroom cabinet is a prerequisite before installation.
2.Look for the pipeline diagram of the water pipe and the circuit diagram of the wire: when installing, it is necessary to punch holes in the wall with a punch drill, so it is very important to confirm the pipeline diagram and circuit diagram before installation. If you break the water pipe or wire circuit diagram, you must pry open part of the wall tiles, it’s may cause unnecessary losses.
3.Confirm the installation height of the bathroom cabinet: the standard installation height of the general bathroom cabinet is 80~85cm, which is calculated from the floor tile to the upper part of the wash basin, and the specific installation height should be determined according to the height and use habits of family members, but it is the most suitable within the standard height range.
4.Do not contact the cabinet mirror with the ground during installation, and should be padded with soft objects to avoid injury caused by broken mirrors.
5.During the installation process, pay attention to prevent screwdrivers and other metal objects from short-distance plate surfaces.
