The Comprehensive Guide to Removing and Installing Bathroom Cabinets

Catalog:

Section 1: Introduction to Bathroom Cabinet

Section 2: Tools and Materials

Section 3：Preparing for the Project

Section 4: Disassembly and assembly of bathroom cabinets

Section 5：Bathroom cabinet installation steps

Section 6：Precautions for bathroom cabinet installation

Section 1: Introduction to Bathroom Cabinet

The bathroom is the sanctuary of relaxation and rejuvenation in our homes, so creating a welcoming and functional bathroom environment is essential. Knowing how to remove and install bathroom cabinets will be an invaluable skill if you’re looking to start a bathroom renovation or want to upgrade your bathroom fixtures. Today’s comprehensive guide walks you through the teardown process and gives you step-by-step instructions. Let’s roll up our sleeves and start designing your bathroom now!

Section 2: Tools and Materials

First of all, before we start to disassemble the bathroom cabinet, we must first prepare the tools we will use, so as to make our installation process more efficient and smooth. The following is a list of items that need to be prepared:

• Essential Tools for Disassembly and Installation:

1. Screwdriver set (Phillips and flat-head)
2. Adjustable wrench
3. Level
4. Measuring tape
5. Stud finder
6. Electric drill
7. Hole saw or jigsaw
8. Safety goggles and gloves
9. Utility knife

• Required Materials for a Successful Project:

1. New bathroom cabinets
2. Wall anchors and screws
3. Shims
4. Wood filler and putty knife
5. Caulk and caulk gun
6. Countertop and sink (if replacing)
7. Plumbing and electrical supplies (if needed)
8. Paint or stain (for finishing)

Section 3：Preparing for the Project

Safety is always your top priority when removing bathroom cabinets. Then it is especially necessary to take the following precautions before starting:

1. If there are lights or outlets inside the vanity, disconnect the electrical connections.
2. Shut off the water supply to avoid any potential leaks or accidents during disassembly.
3. Keep the work area well ventilated, especially when working with adhesives or paints.
4. Wear appropriate safety gear, including goggles and gloves.
5. With safety in mind, the next step is careful planning. Measure the installation space of your new cabinets to make sure they fit snugly and allow enough room for doors and drawers to open. Take note of any plumbing or electrical connections that need to be accommodated.

Section 4: Disassembly and assembly of bathroom cabinets

Alright, now you’re ready to take down your old bathroom vanity. This process may vary depending on your specific setup, but the following steps provide general guidelines:

Step 1: Clean the cabinet and surrounding area:

Start by removing everything from the bathroom cabinet and cleaning the surrounding area.

Step 2: Remove Hardware and Accessories:

Unscrew and remove knobs, handles, and other hardware from cabinet doors and drawers.
Remove any shelves, trays or accessories from the cabinet.

Step 3: Disassemble the doors and drawers:

Open the cabinet door and unscrew the hinges to remove it.
For drawers, slide them all the way out and disconnect any locking devices or slide rails.

Step 4: Loosen the Cabinet Fasteners:

Locate and remove any screws or fasteners securing the cabinet to the wall or floor.

Step 5: Carefully remove the cabinet from the wall:

Enlist the help of a partner to assist with lifting and maneuvering the cabinet.
Slowly and steadily lift the cabinet off the wall while checking for hidden fasteners or adhesives.

By following the steps below, you will be able to successfully and safely remove your old bathroom vanity to make room for the new one.

Section 5：Bathroom cabinet installation steps

Before installation, we should check whether the various accessories and hardware are complete.

Step 1. Install the main cabinet

Select the wall to be installed according to the hole position on the back wall of the cabinet, but the height of the counter surface from the ground is between 80-82cm, use a percussion drill to drill holes in the wall, and expand the accessory plastic in the cabinet into the hole Inside, then lock the main cabinet and the wall with self-tapping screws. After the main cabinet is installed, align the basin with the wooden frame of the cabinet and adjust it to be level.

Step 2. Shelves

The installation method of the special frame is the same as that of the main cabinet. After drilling a hole in a suitable position on the wall, tighten it with screws.

Step 3. Bathroom mirror

First, according to the positions of the two holes on the back of the mirror, determine the position of the two holes on the wall above the main cabinet with a suitable bitmap, but the size of the bottom end of the mirror and the top of the main cabinet is between 23-28cm, then punch the holes and screw on the self- screw, so that the mirror can be installed.

Step 4. Side cabinet

Generally, the side cabinets are mostly floor-standing, and the floor-standing side cabinets only need to fix the cabinet feet. If the side cabinets are also wall-mounted, refer to the installation method of the main cabinet.

Step 5. Detailed installation

1. Check whether the accessories are complete before installation.
2. When installing the triangular valve, make sure whether the hot and cold water pipes are kept flat.
3. The next step is to measure the distance and install the sewer pipe. Be sure to apply the glue evenly, so as to ensure that the connection between the tubes is tight.
4. After that, you can install the corners of the cabinet feet, check whether the corners are all on the same level, and make an appropriate adjustment after installation.
5. The bathroom cabinet should be placed against the wall to see if the position of the water inlet and outlet pipes is properly placed. If it is not suitable, it must be slightly changed.
6.  It is better to purchase the faucet as a set with the bathroom cabinet as much as possible, because the angle of the water outlet will be relatively suitable.
7. The faucet of the basin should be fixed with nuts, and the position of the faucet should be held with one hand when fixing. So as not to deviate from the position during the installation process.
8. After installing the faucet, place the basin on the top of the bathroom cabinet and adjust its position to the best position. When the washbasin is connected to the water inlet and outlet pipes and the water pipes, the length should be appropriate and the position should be reasonable. Use silica gel to fix the basin and ceramic tiles to achieve the stability of the cabinet and prevent leakage.
9.  After the cabinet is installed, the handle should be adjusted to an appropriate level. Turn on the faucet and do a waterproof test to see if the angle of the faucet is right and whether the water flow is smooth. After installation and inspection, the cabinet body should be wiped clean for easy use.

Section 6：Precautions for bathroom cabinet installation

1. Design and installation of the sewer pipe: Before installing the bathroom cabinet, you must consider whether it is wall drainage or ground drainage. If it is wall drainage, the reserved hole on the wall of the sewer pipe should be 50-55cm away from the ground, and For the middle of the cabinet, as long as the ground drainage holes are reserved in the middle of the cabinet, but not too far from the wall.
2. Water inlet pipe: As long as the outlet of the hot and cold water inlet pipe is in the middle of the cabinet, it should be between 45-50cm from the ground or a little higher.
3.  Mirror front light: If you need to install a mirror front light, the outlet of the wire should be about 200cm away from the ground, and placed in the middle of the bathroom cabine

Summarize

Well, that concludes our comprehensive guide to removing and installing bathroom vanities, and at this point you have the knowledge and skills you need to tackle this project with confidence. Roll up your sleeves, grab the tools and start taking action now! One cabinet at a time, your vision will eventually become reality. We are a lormei bathroom cabinet manufacturer, focusing on the production and wholesale sales of bathroom cabinets, we are also industry experts in installing and dismantling bathroom cabinets, if you are interested in purchasing bathroom cabinets from China to start your wholesale business, please do not hesitate to contact us Get in touch now!